Wage determination WA20260059, modification 1
Effective May 18, 2026. Covers 1 Washington county for Heavy work, with 28 rate lines. Base rates run $14.67–$63.50 and fringe $0.00–$34.52 across the classifications listed.
What this determination covers
This is a federal Davis-Bacon determination published on SAM.gov. It applies to federally funded or assisted construction in the counties listed below, for the construction types shown. State-funded public works in Washington are governed by the state's own schedule, which is a separate set of rates — see Washington rates.
The contract controls: if the contract names this determination with a different modification, that version governs, even when a newer determination exists. Copy the number and the modification into field 5 of the WH-347.
| Attribute | Value |
|---|---|
| Determination | WA20260059 |
| Modification | 1 |
| Effective | May 18, 2026 |
| Construction types | Heavy |
| Counties | 1 |
| Rate lines | 28 |
| Other Washington determinations | 97 active in this state → |
Rate table
Every classification the determination lists, with the basic hourly rate, the fringe rate and the total package. Overtime is 1.5× the basic hourly rate; fringe is not multiplied. A row marked per day is a daily rate rather than an hourly one.
| Classification | Base rate | Fringe | Total | Effective | Code |
|---|---|---|---|---|---|
| Millwright | $59.35 | $22.38 | $81.73 | 06/01/2025 | CARP0096-009 |
| Carpenter | $54.69 | $16.81 | $71.50 | 06/01/2025 | CARP0503-022 |
| Electrician | $63.50 | $29.73 | $93.23 | 01/01/2025 | ELEC0048-032 |
| Power Equipment Operator | $48.09 | $17.15 | $65.24 | 01/01/2025 | ENGI0701-013 |
| Power Equipment Operator | $51.31 | $17.15 | $68.46 | 01/01/2025 | ENGI0701-013 |
| Power Equipment Operator | $52.55 | $17.15 | $69.70 | 01/01/2025 | ENGI0701-013 |
| Power Equipment Operator | $55.88 | $17.15 | $73.03 | 01/01/2025 | ENGI0701-013 |
| Power Equipment Operator | $57.03 | $17.15 | $74.18 | 01/01/2025 | ENGI0701-013 |
| Power Equipment Operator | $63.26 | $17.15 | $80.41 | 01/01/2025 | ENGI0701-013 |
| Power Equipment Operator | $61.10 | $17.15 | $78.25 | 01/01/2025 | ENGI0701-013 |
| Power Equipment Operator | $58.94 | $17.15 | $76.09 | 01/01/2025 | ENGI0701-013 |
| Ironworker | $48.31 | $34.52 | $82.83 | 07/07/2025 | IRON0029-009 |
| Laborer | $46.08 | $15.60 | $61.68 | 06/01/2025 | LABO0335-027 |
| Laborer | $44.90 | $15.60 | $60.50 | 06/01/2025 | LABO0335-027 |
| Laborer | $44.06 | $15.60 | $59.66 | 06/01/2025 | LABO0335-027 |
| Laborer | $40.56 | $15.60 | $56.16 | 06/01/2025 | LABO0335-027 |
| Painter | $39.94 | $16.68 | $56.62 | 07/01/2025 | PAIN0010-016 |
| Cement Mason/concrete Finisher | $54.16 | $21.27 | $75.43 | 06/01/2024 | PLAS0528-004 |
| Truck Driver | $24.61 | $8.34 | $32.95 | 08/07/2009 | SUWA2009-050 |
| Truck Driver | $24.36 | $8.30 | $32.66 | 08/07/2009 | SUWA2009-050 |
| Truck Driver | $21.46 | $5.96 | $27.42 | 08/07/2009 | SUWA2009-050 |
| Pipefitter | $33.77 | $8.82 | $42.59 | 08/07/2009 | SUWA2009-050 |
| Operator | $25.25 | $8.20 | $33.45 | 08/07/2009 | SUWA2009-050 |
| Operator | $25.53 | $7.70 | $33.23 | 08/07/2009 | SUWA2009-050 |
| Operator | $26.11 | $7.87 | $33.98 | 08/07/2009 | SUWA2009-050 |
| Operator | $27.22 | $7.63 | $34.85 | 08/07/2009 | SUWA2009-050 |
| Laborer | $14.67 | $0.00 | $14.67 | 08/07/2009 | SUWA2009-050 |
| Fence Erector | $15.00 | $0.00 | $15.00 | 08/07/2009 | SUWA2009-050 |
Counties covered
Each link opens the county lookup already set to this county and this determination.
Using it on a payroll
- Confirm the version. Take the modification from the contract, not from this page — this page shows the newest published modification.
- Match the classification, not the job title. A title the determination does not list is a rejection even at a higher rate.
- Split base and fringe. Show the basic rate in 6A, the plan credit in 6B and cash in lieu in 6C; omitting fringe is a shortfall, not a saving.
- Check the overtime clock. This state uses a daily eight-hour test in addition to the weekly forty.
The field-by-field mapping is in the WH-347 guide.